Kyocera KM-C2525E Service Manual page 164

2JL/2JJ/2JG/2JD-1
Batch scanning
Configure batch scanning for default settings mode.
1. Select [Batch Scanning] using the cursor up/down
keys and press [Change #].
2. Select [On] or [Off].
One page per file
Configure One Page Per File for default settings mode.
1. Select [One Page Per File] ([Output Each Page])
using the cursor up/down keys and press [Change
#].
2. Select [On] or [Off].
File name
Set the scanner image filename for default settings
mode.
1. Select [File Name] using the cursor up/down keys
and press [Change #].
2. Press [Change].
3. Enter the filename and press [End].
Auto center
Configure Auto Center for default settings mode.
1. Select [Auto Center] ([Image shift]) using the cursor
up/down keys and press [Change #].
2. Select [On] or [Off].
Continuous scanning
Use the same settings from a previously completed
transmission for the next transmission.
1. Select [Continuous Sending] using the cursor up/
down keys and press [Change #].
2. Select [On] or [Off].
File name input
File Name Input configure the machine to display the file-
name input box without displaying the auto/manual selec-
tion screen.
1. Select [File Name Input] using the cursor up/down
keys and press [Change #].
2. Select [Manual] or [Auto/Manual].
Skip sender (user) select
Set [Selec. of senders (users)] to set the sender (user) to
User No. 001 and skip the sender (user) selection step.
1. Select [Selec. of senders (users)] using the cursor
up/down keys and press [Change #].
2. Select [On] or [Off].
Enter E-mail address
When sending E-mail, specify whether to directly enter
the mail address when selecting recipients.
1. Select [Input E-mail Address] using the cursor up/
down keys and press [Change #].
2. Select [On] or [Off].
1-3-124
Color mode setting
Set the color mode for default settings mode.
1. Select [Color setting] ([Colour setting]) using the
cursor up/down keys and press [Change #].
2. Press [Auto color key] ([Auto col. key]), [Full-Color
key] ([Full col. key]) or [B&W key].
B&W setting
Set the B&W mode for default settings mode.
1. Select [B&W setting] using the cursor up/down keys
and press [Change #].
2. Select [Black&white] or [Gray scale].
(7) Fax default setting
This setting is shown only when the optional FAX kit has
been installed. For details, refer to the FAX Kit service
manual.