Configure Device Ha On The Master Zywall - ZyXEL Communications ZYWALL USG 1000 - EDITION 2 Manual
Unified security gateway
Hide thumbs
Also See for ZYWALL USG 1000 - EDITION 2:
- User manual (1075 pages) ,
- Support notes (345 pages) ,
- Quick start manual (130 pages)
Table of Contents
Advertisement
Chapter 7 Tutorials
7.14.2 Configure Device HA on the Master ZyWALL
Log into ZyWALL A (the master) and click Configuration > Device HA > Active-
1
Passive Mode. Double-click ge1's entry.
Configure 192.168.1.3 as the Management IP and 255.255.255.0 as the
2
Manage IP Subnet Mask. Click OK.
Figure 122 Configuration > Device HA > Active-Passive Mode > Edit: Master
ZyWALL Example
Set the Device Role to Master. This example focuses on the connection from the
3
LAN (ge1) to the Internet through the ge2 interface, so select the ge1 and ge2
interfaces and click Activate. Enter a Synchronization Password
("mySyncPassword" in this example) and click Apply.
Figure 123 Configuration > Device HA > Active-Passive Mode: Master ZyWALL
Example
164
ZyWALL USG 1000 User's Guide
Advertisement
Table of Contents
Troubleshooting
