Configure Device Ha On The Master Zywall - ZyXEL Communications USG-100@USG-200 - V2.20 ED 2 Manual

7.15.2 Configure Device HA on the Master ZyWALL

Log into ZyWALL A (the master) and click Configuration > Device HA > Active-
1
Passive Mode. Double-click lan1's entry.
Configure 192.168.1.3 as the Management IP and 255.255.255.0 as the
2
Manage IP Subnet Mask. Click OK.
Figure 147 Configuration > Device HA > Active-Passive Mode > Edit: Master
ZyWALL Example
ZyWALL USG 100/200 Series User's Guide
Chapter 7 Tutorials
181