Correcting Misalignment Of The Printing And Cutting Positions - Roland LEC-300A User Manual

5-6 Making Various Adjustments for Cutting

Correcting Misalignment of the Printing and Cutting Positions

Procedure
1.
Check the setting for the [AUTO ENV. MATCH] menu item.
Make sure the [AUTO ENV. MATCH] menu item is set to "ENABLE."
 P. 102, "Executing Environment Matching Automatically"
2.
Execute the [ADJUST BI-DIR] menu item.
 Load the media.
 P. 35, "Loading Media," p. 98, "How to Load Sheet Media"

Perform bidirectional adjustment.
 P. 107, "Correcting for Misalignment in Bidirectional Printing," p. 108, "Correcting for Misalignment in Bidi-
rectional Printing More Precisely"
3.
Print a test pattern and cut it.

MENU
CUTTING MENU

CUTTING MENU
PRINT - CUT ADJ.

PRINT - CUT ADJ.
TEST PRINT
Cutting position and printing
position are misaligned.
120
Chapter 5 Feature Reference
Press .
Press several times.
Press .
Press .
Press .
The test pattern is printed at three locations: at the two edges
and in the center.
When adjustment is needed, go on to the steps below.
Cutting
position
Printing
position
Cutting position and print-
ing position are aligned.
Cutting
position
Printing
position