Viewing Information About The Media And The System; Displaying The Amount Of Media Remaining - Roland LEC-300A User Manual

5-12 Viewing Information about the Media and the System

Displaying the Amount of Media Remaining

Procedure

MENU
SHEET REMAIN

SHEET REMAIN
SET LENGTH

SET LENGTH
0.0 m

W 736 mm
This display is updated.
SETUP SHEET
ROLL
If setup has not been performed, the set value flashes.
Description
You can display how much of the media in use is left. Once you set the amount of media remaining,
the amount remaining is displayed at the top menu until it reaches zero. If you cancel the setup such
as by removing the media, the amount remaining at that time flashes on the screen.
The amount of media remaining is not updated automatically when you change the media. Redo the
setting whenever you change the media. Note, however, that when sheet media is loaded (that is,
when [SETUP SHEET] is set to "PIECE"), the setting for the amount of remaining media is made auto-
matically.
You can also make the setting display this menu automatically whenever you change the media. See
the next section, "Verifying the Setting for the Amount Remaining Every Time the Media Is Changed."
Note: The remaining amount that is displayed is only an estimate, and its accuracy is not assured.
136
Chapter 5 Feature Reference
Press
Press
Press
Press
Press
Use
25.0 m
maining.
Press
Press
L 25.0 m
L 25.0 m
.
several times.
.
.
.
to set the amount of media re-
to enable the setting.
to go back to the original screen.