Switching The Power On And Off - Roland LEC-300A User Manual

2-2 Switching the Power On and Off

Switching the Power On and Off
This machine has a main power switch and a sub power switch. Switch on both to use the machine.
Whenever printing is finished, switch off the sub power. You also flip down the loading lever to the
rear of the machine.
Leave the main power switch
feature.
 P. 86, "Alarm Feature"
 Main power
switch
Be sure to
leave switched
on at all times.
Back of the printer
Important Note on Switching Off the Power
Never switch off the main power or unplug the power cord suddenly while operation is
in progress. Doing so may damage the print heads. Be sure to first switch off the sub
power.
If the main power is accidentally switched off, immediately turn the power back on.
 on at all times, never switching it off. Leaving it on activates the alarm
 Sub power
switch
Front of the printer
Turn this switch on after
closing the front cover.
To turn it off, hold down
the switch for one sec-
ond or longer.
Flip the loading lever down
to the rear when not in use.
Chapter 2 Basic Operation
33