Operation Panel - Roland LEC-300A User Manual

1-2 Part Names and Functions

Operation Panel

TEST PRINT key
Holding this down for
one second or longer
performs a printing
test.
CLEANING key
You use this to perform
cleaning of the print
heads.
TEST CUT key
Holding this down for
one second or longer
per forms a cutting
test.
CUT CONFIG key
This displays the menu
for setting the condi-
tions for cutting.
Panel Notation
In this document, the keys and lights on the operation panel are indicated by the following images.
MENU key
SETUP key
ENTER key
PAUSE key
CLEANING key
TEST PRINT key
TEST CUT key
BASE POINT key
CUT CONFIG key
SHEET CUT key
28
Chapter 1 Introduction
Display screen
This displays various
setting menus and
other information.
MENU key
You press this to
enter the menus
for various set-
Cursor keys
tings.
You use these to select set-
tings for menu items, to
move the media, and for
other such operations.
Cursor keys
BUSY light
This lights up during
printing and other such
operations.
ENTER key
You use this for such tasks as
enabling setting values.
BASE POINT key
You use this when you
want to set the print-
start location. This lights
up when the setting has
been made.
SETUP key
You press this when you
load media. This lights
up when media is loaded
and the machine is ready
to perform printing.
PAUSE key
This pauses printing.
SHEET CUT key
Holding this down for
one second or longer
cuts off media.
Sub power switch
This switches the printer
on and off. (To switch
the printer off, you hold
down the switch for one
second or longer.) This
flashes slowly when the
machine is in the sleep
mode.