2-3 Loading and Cutting Off Media
Attach the media flanges to the roll media.
If the inner diameter of the roll-media core measures 3 inches, fit the media flanges onto the
core, then turn each knob clockwise all the way to keep the media flanges from falling out.
Knob
Detach the rear cover.
Place the roll media on the shafts and position its left and right edges to match
the grit patterns.
20 mm or more
36
Chapter 2 Basic Operation
2 inches
Match to the inner diameter
of the roll-media core.
Roll-media
Rear cover
Be sure to ensure
the media is within
this range.
3 inches
Press in to fit on
securely.
Turn until the knob
stops rotating.
20 mm or more