Roland LEC-300A User Manual page 103


Press and hold
Hold down until the print-end position reaches the platen.
For media that passes through the media discharge port of ①, be sure to comply with the
following. Otherwise problems such as the print heads striking the sheet media may occur,
resulting in malfunction or the like.
 Never use the media clamps.
 Increase the height of the print heads.
 P. 106, "Adjusting Head Height to Match Media Thickness"

Press and hold
Hold down until the end of the sheet media reaches the location shown in the figure.
Sheet media
3.
Get ready to receive the data from the computer.

Close the front cover.

SETUP SHEET
PIECE
5-3 Accommodating Various Kinds of Media
.
.
Align here
Use
Press
to select "PIECE."
.
Chapter 5 Feature Reference Chapter 5 Feature Reference
101