4-8 Making Various Adjustments for Cutting
Correcting Misalignment of the Printing and Cutting Positions
Procedure
1.
Check the setting for the [AUTO ENV. MATCH] menu item.
Make sure the [AUTO ENV. MATCH] menu item is set to "ENABLE."
P. 84, "Executing Environment Matching Automatically"
2.
Execute the [ADJUST BI-DIR] menu item.
Load the media.
P. 32, "Loading Media"
P. 82, "How to Load Sheet Media"
Perform bidirectional adjustment.
P. 73, "Correcting for Misalignment in Bidirectional Printing"
P. 74, "Correcting for Misalignment in Bidirectional Printing More Precisely"
3.
Print a test pattern and cut it.
MENU
CUTTING MENU
CUTTING MENU
PRINT - CUT ADJ.
PRINT - CUT ADJ.
TEST PRINT
Cutting position and print-
ing position are misaligned.
4.
Print and cut a test pattern for setting the correction values.
PRINT - CUT ADJ.
TEST PRINT 2
92
Chapter 4 Feature Reference
Press
Press
Press
Press
Press
The test pattern is printed at three locations: at the two edges and
in the center.
When adjustment is needed, go on to the steps below.
Cutting
position
Printing
position
Cutting position and print-
ing position are aligned.
Press
.
Press
to execute.
.
.
.
.
.
Cutting
position
Printing
position