Roland LEC-300A User Manual page 39


Secure the stoppers in place in alignment with the width of the media.
Make sure the media flanges are straight. Correct media feed is impossible if either of the media
flanges is at an angle.

Attach the rear cover.
Engage.
Rear cover

Pass the leading edge of the media between the grit rollers and the pinch roll-
ers, and feed it out as far as the platen.
Pinch roller
Stoppers
OK
2-3 Loading and Cutting Off Media
Screws
Not OK
Engage.
Platen
Grit roller
Chapter 2 Basic Operation
37