Roland LEC-300A User Manual page 120

5-6 Making Various Adjustments for Cutting
4.
Check the results of the cutting test and make adjustments.

Open the front cover.

Check the results of the cutting test and make adjustments.
 P. 114, "Fine-tuning the Cutting Conditions," p. 116, "Adjusting the Cutting-in Amount"

Close the front cover.
5.
Check the results of the cutting test and make adjustments.

Use
Align the center of the blade with a location where you can perform a cutting test overtop the
cutting-test print pattern.

Press

Press

Open the front cover.
 Check the results of the cutting test.
Adjustment is complete when optimal results are obtained. If further adjustment is needed, go
back to step
118
Chapter 5 Feature Reference
.
.
4.

- and fine-tune the adjustment.
to move the cutting carriage.