Setting The Interval Until Activation Of The Sleep Mode - Roland LEC-300A User Manual


W 736mm
SETUP SHEET
ROLL
Description
This lets you change, according to your purpose, the operation that takes place when an ink cartridge
is empty.
"STOP" immediately pauses operation when a cartridge becomes empty. Because pausing printing in
progress may make colors uneven, it is best to ensure a sufficient amount of remaining ink before you
begin printing.
"CONT." (continue) is a mode in which operation is not automatically stopped. When a cartridge be-
comes empty, a warning beep sounds but printing doesn't stop. To replace the cartridge, you must
either wait until printing ends or press
even if ink runs out completely.
Default Setting
[EMPTY MODE]: STOP

Setting the Interval until Activation of the Sleep Mode

Procedure

MENU
SUB MENU

SUB MENU
SLEEP

INTERVAL
30min
15min

W 736mm
SETUP SHEET
ROLL
Default Setting
[INTERVAL]: 30min
5-4 Changing How the Printer Operates
Press .
Press to go back to the original screen.
to pause printing. Note that operation does not stop
Press .
Press several times.
Press .
Press several times.
Press twice.
Use to make the setting.
Press to enable the setting.
Press .
Press to go back to the original screen.
Chapter 5 Feature Reference
103