Loading A Saved Preset; Assigning A Name To A Preset - Roland LEC-300A User Manual

[PRINT-CUT ADJ.]
[CROP-CUT ADJ.]
Up to eight types of presets can be saved. You can assign a name to each one. Using media names for
these may aid recognition and clarity.
 P. 133, "Loading a Saved Preset," p.133, "Assigning a Name to a Preset"

Loading a Saved Preset

Procedure

MENU
PRESET

LOAD
NAME1

Description
This loads a saved preset. You can select any one of eight types of presets. (When no names have
been assigned, you select from among NAME1 through NAME8.) If you load a preset while
illuminated, goes dark. To start printing, press
for printing.

Assigning a Name to a Preset

Procedure

PRESET
NAME

NAME
NAME1
5-10 Saving the Printer Settings to Match the Media
P. 120, "Correcting Misalignment of the Printing and
Cutting Positions"
P. 126, "Correcting Misalignment for Printing and Cut-
ting When Using Crop Marks"
Press .
Press twice.
Use to select the name of a preset
you want to load.
Press to load.
The settings are changed and the screen shown in the figure
appears.
once more and redo the preparations
Press .
Press .
Press twice.
Press .
Use to select any one from NAME1
to NAME8.
Chapter 5 Feature Reference
is
133