Correcting The Misalignment Of The Printing And Cutting Positions During Cutting - Roland TrueVIS VG-640 User Manual

Advanced Cutting Settings

Correcting the Misalignment of the Printing and Cutting Positions during Cutting

Procedure
A
During cutting, press [PAUSE] to display the screen shown below.
TO CANCEL
DOWN PAUSE KEY
The cutting operation is paused.
B
Press [FUNCTION].
C
Press [ ] several times to display the screen shown below.
FUNCTION
CUT CONFIG
D
Press [ ] once, and then press [ ] several times to display the screen shown below.
CUT CONFIG
PRINT-CUT ADJ.
4
E
Press [ ].
F
Determine the correction values.
Printing position and cutting
position are misaligned.
144
HOLD
Cutting position
Correct the
misalignment.
Printing position
- [S]
[F] (media feed direction)
[S] (cutting carriage movement direction)
-
[F]
+
+