3-2 Using the Media Take-up System
Loading Roll Media
1.
Pass the media through the printer.
Move the dancer roller toward the rear.
Load the roll media.
P.35, "Loading Media"
Pull back the loading lever.
The media is secured in place.
2.
Fasten the media to the paper tube.
When you attach the paper tube, insert it securely onto the end caps on the take-up unit. For informa-
tion on how to install it, refer to the Setup Guide.
SETUP SHEET
TU
LOAD SHEET
TO TAKE-UP
58
Chapter 3 Operation of the Media Take-up System
Dancer roller
Use
Press
The screen shown in the figure appears.
Loading lever
to select "TU."
.