Roland LEC-300A User Manual page 61


Press
You can adjust the length of the media in 10-millimeter steps by pressing
To pull out media continuously, hold down

Fasten the media in place with tape at three locations (the center and both
edges) so that the media is not at an angle.
■
Take-up with outward curl
Fasten first.
Paper tube
■
Take-up with inward curl
Fasten first.
Paper tube
Adhesive tape (3 places)
to adjust the length of the media to be pulled out.
Adhesive tape (3 places)
Chapter 3 Operation of the Media Take-up System
3-2 Using the Media Take-up System
.
.
59