Roland LEC-300A User Manual page 70

4-2 When Head Cleaning Is Not Effective
If the Printing-test Results Are Difficult to Interpret
Examine the results from different angles in a well-lighted location. Take advantage of
reflected light to enable visual checking. We recommend performing the printing test
on transparent or silver-colored media.
3.
Start cleaning.

Press
If You Chose "MEDIUM CL."
LEC-300A
CLEANING...
>>
MEDIUM CL.
LEC-330
CLEANING...
>>
MEDIUM CL.
If You Chose "POWERFUL CL."
CHECK
DRAIN BOTTLE

Check the drain bottle.
If the amount of discharged fluid is near the upper-limit line, then remove the
bottle, discard the collected fluid, and reattach the bottle.
 P. 64, "Disposing of Discharged Ink," step

LEC-300A
CLEANING...
>>
POWERFUL CL.
LEC-330
CLEANING...
>>
POWERFUL CL.
68
Chapter 4 Maintenance and Adjustment
.
A
A C
A
A C
The screen shown in the figure appears, then cleaning starts.
When it finishes, the screen shown in the figure appears. Go

on to Step
The screen shown in the figure appears. Go on to Step
2
Press .
The screen shown in the figure appears, then cleaning starts.
When it finishes, the screen shown in the figure appears again.

Go on to Step .

.