If Ink Runs Out - Roland LEC-300A User Manual

If Ink Runs Out

When ink runs out, a warning beep sounds and printing pauses (unless the default settings have been
changed). Pull out the empty ink cartridge and insert a new one. Printing resumes.
Important Notes on Replacing Cartridges
 Be sure to replace with an item of identical type. Never mix items of different
types.
 Never allow the machine to stand with an ink cartridge removed. The print heads
may become clogged.
 Never insert or remove a partially used ink cartridge.
 Never remove an ink cartridge suddenly while the printer is in operation.
 When printing is paused, the coloring at the seam may be altered when printing
resumes. Before you perform lengthy printing, check the amount of ink remaining in
the ink cartridges.
WARNING
Procedure

The slot number for the empty cartridge flashes.

Gently shake the new ink cartridge.
Never store ink, cleaning fluid, or discharged fluid in any of the
following locations.
 Any location exposed to open flame
 Any location where high temperature may occur
 Near bleach or any other such oxidizing agent or explosive material
 Any location within the reach of children
Fire may be a danger. Accidental ingestion by children may pose a
health hazard.
2-5 If Ink Runs Out
Chapter 2 Basic Operation
49