Toyota 1996 LAND CRUISER User Manual page 844

EM−60
P08374
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
ENGINE MECHANICAL
10.
(a)
(b)
(c)
P03789
11.
(a)
(b)
1 Dot Mark
If not, turn the crankshaft 1 revolution (360°) and align the mark
as above.
12.
(a)
(b)
A16075
13.
(a)
(b)
(c)
(d)
(e)
Brought to you by BirfMark
Version 1.00 - 12/21/2010
− CYLINDER HEAD
INSTALL SEMI−CIRCULAR PLUG
Remove any old packing (FIPG) material.
Apply seal packing to the cylinder head installation sur-
face of the semi−circular plug.
Seal packing: Part No. 08826−00080 or equivalent
Install the semi−circular plug to the cylinder head.
SET NO. 1 CYLINDER TO TDC/COMPRESSION
Turn the crankshaft pulley, and align its groove with the
timing mark "0" of the timing chain cover.
Check that the timing marks with 1 and 2 dots are in
straight line on the cylinder head surface as shown in the
illustration.
INSTALL CYLINDER HEAD COVER
Install the gasket to the cylinder head cover.
Install the cylinder head cover with the 13 bolts.
INSTALL WATER BYPASS OUTLET AND PIPE
Install a new O−ring to the water bypass outlet.
Install 2 new O−rings to the water bypass pipe.
Apply soapy water to the O−rings.
Assemble the water bypass outlet and pipe.
Install the water bypass outlet and pipe with the 2 bolts.
Torque: 21 N·m (210 kgf·cm, 15 ft·lbf)