Toyota 1996 LAND CRUISER User Manual page 1145

SST
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
SUSPENSION AND AXLE
15. w/ DIFFERENTIAL LOCK:
REMOVE DIFFERENTIAL CASE ASSEMBLY
(a) Place matchmarks on the bearing cap and differential car-
rier.
(b) Remove the 4 bolts and 2 bearing caps.
Matchmarks
SA2437
(c) Using SST, remove the plate washers.
SST
SST
HINT:
Measure the plate washer thickness and note it.
(d) Remove the differential case with the side bearing outer
races from the differential carrier.
HINT:
Tag the bearing outer races to show the location for reassembly.
R08254
16. REMOVE DRIVE PINION AND BEARING SPACER
FROM DIFFERENTIAL CARRIER
(a) Remove the drive pinion with the rear bearing.
(b) Remove the bearing spacer.
17. REMOVE DRIVE PINION REAR BEARING
(a) Using SST and a press, remove the rear bearing from the
drive pinion.
SST
HINT:
Z06911
If the drive pinion or ring gear are damaged, replace them as
a set.
(b) Remove the plate washer from the drive pinion.
18. REMOVE FRONT AND REAR BEARING OUTER
RACES
Using a brass bar and hammer, remove the outer races.
SA2424
Brought to you by BirfMark
Version 1.00 - 12/21/2010
− REAR DIFFERENTIAL CARRIER
09504−22011
09950−00020
SA−83