Toyota 1996 LAND CRUISER User Manual page 1173

1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
SUSPENSION AND AXLE −
(3)
Torque: 18 N·m (185 kgf·cm, 13 ft·lbf)
SA2619
(i) Install the rear Diff. position switch.
Install the position switch with a new gasket.
Torque: 40 N·m (410 kgf·cm, 30 ft·lbf)
(j) Connect the connectors and tube.
HINT:
The depth of the insertion of the bleeder tube into the
S
hose is approx. 15 mm (0.59 in.).
Take care that the water or the equivalent will not adhere
S
to the connectors and hose.
(k) Install the actuator protector.
Install the protector with the 2 nuts and bolt.
Torque:
Nut: 35 N·m (360 kgf·cm, 26 ft·lbf)
Bolt: 20 N·m (200 kgf·cm, 14 ft·lbf)
(l) Cancel the rear differential lock.
With the ignition switch ON, turn the differential lock con-
trol switch to OFF to cancel the differential lock.
Z07261
Brought to you by BirfMark
Version 1.00 - 12/21/2010
DIFFERENTIAL LOCKING SYSTEM
Tighten the 3 bolts.
SA−111