Toyota 1996 LAND CRUISER User Manual page 1070

SST
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
SUSPENSION AND AXLE −
REMOVAL
1. REMOVE FRONT WHEEL
2. REMOVE BRAKE CALIPER (See page BR−25)
3. REMOVE FLANGE
(a) Using a screwdriver and hammer, remove the grease cap
from the flange.
(b) Using a snap ring expander, remove the snap ring.
(c) Loosen the 6 mounting nuts.
(d) Using a brass bar and hammer, tap on the 6 bolts heads
and remove the 6 cone washers, plate washers and nuts.
(e) Remove the flange.
(f) Remove the gasket.
4. REMOVE AXLE HUB WITH DISC
(a) Using a screwdriver, release the lock washer.
(b) Using SST, remove the lock nut.
SST
(c) Remove the lock washer.
(d) Using SST, remove the adjusting nut and thrust washer.
SST
(e) Remove the hub and disc together with the outer bearing.
5. REMOVE OIL SEAL AND INNER BEARING
(a) Using SST, remove the oil seal.
SST
(b) Remove the inner bearing from the hub.
SA2635
Brought to you by BirfMark
Version 1.00 - 12/21/2010
FRONT AXLE HUB
09607−60020
09607−60020
09308−00010
SA−7
SA1UB−01