Toyota 1996 LAND CRUISER User Manual page 411

CH−10
SST (B)
Hold
SST (C)
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
CHARGING −
4. REMOVE RECTIFIER HOLDER
(a) Remove the 4 screws and rectifier holder.
(b) Remove the 4 rubber insulators.
(c) Remove the seal plate.
5. REMOVE PULLEY
SST (A)
(a) Hold SST (A) with a torque wrench, and tighten SST (B)
clockwise to the specified torque.
SST
Turn
Torque: 39 N·m (400 kgf·cm, 29 ft·lbf)
(b) Check that SST (A) is secured to the rotor shaft.
P03807
(c) Mount SST (C) in a vise.
(d) Install the generator to SST (C).
P08242
Brought to you by BirfMark
Version 1.00 - 12/21/2010
GENERATOR
09820−63010