Toyota 1996 LAND CRUISER User Manual page 1167

Ohmmeter
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
SUSPENSION AND AXLE
4. INSPECT DIFF. LOCK CONTROL SWITCH
4 2 1
Inspect the switch continuity between terminals, as shown.
Switch Position
SA1948
If continuity is not as specified, replace the switch.
5. INSPECT DIFF. LOCK POSITION SWITCH
(a) Front and Rear:
Inspect the diff. lock position switch.
(1)
(2)
If operation is not as specified, replace the switch.
Z07264
(b) Inspect the center diff. indicator switch.
6. INSPECT VEHICLE SPEED SENSOR AND INDICATOR
LIGHT
(a) Inspect the vehicle speed sensor (See page BE−34).
(b) Inspect the indicator light.
Brought to you by BirfMark
Version 1.00 - 12/21/2010
− DIFFERENTIAL LOCKING SYSTEM
Terminals
OFF 1 − 2
1 − 4
RR 1 − 2
1 − 4
FR RR 1 − 2
1 − 4
Check that there is continuity between terminals
when the switch is pushed (differential connected
position).
Check that there is no continuity when the switch is
free (differential disconnected position).
Author :
SA−105
Specified Condition
No continuity
No continuity
No continuity
Continuity
Continuity
Continuity
Date : 962