Toyota 1996 LAND CRUISER User Manual page 1078

SA−16
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
SUSPENSION AND AXLE −
(g) Coat the joint inner parts and outer shaft inside with mo-
lybdenum disulpfide lithium base grease, NLGI No.2.
(h) Install the inner race in the cage through the large open-
ing.
(i) Position the protruding end of the inner race toward the
wide side of the cage.
(j) Assemble the cage and inner race to the outer shaft by
fitting the 2 large openings in the cage against the pro-
truding parts of the outer shaft.
(k) Make sure to position the wide side of the cage and the
inner race protruding end outward.
(l) Fit in the inner race and cage and install the 6 bearing
balls in the outer shaft (See step (c)).
(m) Pack molybdenum disulpfide lithium base grease, NLGI
No.2 in the outer shaft.
(n) Install a new snap ring on the inner shaft.
(o) Hold the outer shaft in a vise and while compressing the
snap ring, install the inner shaft to the outer shaft.
(p) Make sure that the inner shaft cannot be pulled out.
FA0107
Brought to you by BirfMark
Version 1.00 - 12/21/2010
STEERING KNUCKLE AND AXLE SHAFT