Toyota 1996 LAND CRUISER User Manual page 1084

SA−22
SST
Oil Storage Ring
SST
Rear Bearing
SST
SST
1.0 mm (10.039 in.)
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
SUSPENSION AND AXLE
6.
Using SST, remove the bearing outer race.
NOTICE:
Do not scratch the taper surface of the outer race.
SA2430
7.
Using a screwdriver, bend the oil storage ring and drive it out.
8.
SA2271
9.
10.
Using SST, install a new oil storage ring.
11.
(a)
(b)
R13155
12.
(a)
(b)
(c)
SA2411
13.
SST
(a)
(b)
R13139
Brought to you by BirfMark
Version 1.00 - 12/21/2010
− FRONT DIFFERENTIAL REAR OIL SEAL
REMOVE REAR BEARING OUTER RACE
SST 09308−00010
REMOVE OIL STORAGE RING
REMOVE BEARING SPACER
INSTALL BEARING SPACER
INSTALL OIL STORAGE RING
SST 09316−60011 (09316−00011, 09316−00021)
INSTALL REAR BEARING
Using SST, install the bearing outer race.
SST 09316−60011 (09316−00011, 09316−00021)
Install the rear bearing.
INSTALL OIL SLINGER AND OIL SEAL
Install the oil slinger.
Using SST, install a new oil seal, as shown.
SST 09214−76011
Oil seal drive in depth: 1.0 mm (0.039 in.)
Coat the lip of the oil seal with MP grease.
INSTALL COMPANION FLANGE
Using SST, install the companion flange on the drive pin-
ion.
SST 09950−30010 (09951−03010, 09953−03010,
09954−03010, 09955−03030, 09956−03020)
Place the plate washer on the companion flange.