Toyota 1996 LAND CRUISER User Manual page 1217

SF−32
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
SFI − INJECTOR
INSTALLATION
1. INSTALL INJECTORS AND DELIVERY PIPE
(a) Install a new grommet to the injector.
(b) Apply a light coat of gasoline to a new O−ring and install
it to the injector.
FI6429
(c) While turning the injector left and right, install it to the de-
livery pipe. Install the 6 injectors.
(d) Position the injector connector upward.
(e) Place 6 new insulators and the 3 spacers in position on
the intake manifold.
(f) Place the 6 injectors together with the delivery pipe in
position on the intake manifold.
(g) Temporarily install the 3 bolts holding the delivery pipe to
the intake manifold.
(h) Check that the injectors rotate smoothly.
HINT:
If injectors do not rotate smoothly, the probable cause is incor-
rect installation of O−rings. Replace the O−rings.
(i) Position the injector connector upward.
(j) Tighten the 3 bolts holding the delivery pipe to the intake
manifold.
Torque: 21 N·m (210 kgf·cm, 15 ft·lbf)
Brought to you by BirfMark
Version 1.00 - 12/21/2010
SF1EP−01