Toyota 1996 LAND CRUISER User Manual page 650

DI−218
DTC
CIRCUIT DESCRIPTION
DTC No.
Either of the following 1 or 2 is detected:
1. After the battery terminal is connected, input from the
deceleration sensor does not change at one cycle (0
km/h → more than 30 km/h → 0 km/h) for 16 times con-
43
tinuously
2. When the brake pedal is not depressed at vehicle speed
of 5 km/h or more, forward and backward G (more than
0.4 G) is detected for 30 seconds or more
INSPECTION PROCEDURE
1 Check deceleration sensor (See page DI−190).
OK
2 Check for open or short in harness and connector between sensor and ECU (See
page IN−28).
OK
Check and replace ABS ECU.
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
DIAGNOSTICS
43 Malfunction in Deceleration Sensor
DTC Detecting Condition
Brought to you by BirfMark
Version 1.00 - 12/21/2010
− ANTI−LOCK BRAKE SYSTEM
S Deceleration sensor
S Wire harness for deceleration sensor system
NG Replace deceleration sensor.
NG Repair or replace harness and connector.
DI5M6−02
Trouble Area