Toyota 1996 LAND CRUISER User Manual page 1052

SUPPLEMENTAL RESTRAINT SYSTEM
Battery
Front Passenger
SST
Airbag Assembly
10 mm (33 ft) or more
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
− FRONT PASSENGER AIRBAG ASSEMBLY
(3) Tie the tires together with 2 wire harnesses.
CAUTION:
Make sure that the wire harnesses are tight. It is very dan-
gerous if loose wire harnesses result in the tires coming
free due to the shock from the airbag deploying.
HINT:
Place the SST connector and wire harness inside tires. Provide
at least 1 m (3 ft) of slack for the wire harness.
R05403
(e) Install the SST.
Connect the SST connector to the front passenger airbag
assembly connector.
SST 09082−00700
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.
(f) Deploy the airbag
(1) Connect the SST red clip to the battery positive (+)
R09690
terminal and the black clip to the battery negative
(−) terminal.
(2) Confirm that no one is within 10 m (33 ft) area
around the tire which the front passenger airbag as-
sembly is tied to.
(3) Press the SST activation switch and deploy the air-
bag.
HINT:
The airbag deploys simultaneously as the LED of the SST ac-
tivation switch lights up.
(g) Dispose of the front passenger airbag assembly.
CAUTION:
The front passenger airbag assembly is very hot
S
when the airbag is deployed, so leave it alone for at
least 30 minutes after deployment.
Use gloves and safety glasses when handling a front
S
passenger airbag assembly with deployed airbag.
Always wash your hands with water after completing
S
the operation.
R09687
Do not apply water, etc. to a front passenger airbag
S
assembly with deployed airbag.
(1) Remove the front passenger airbag assembly from
the tire.
(2) Place the front passenger airbag assembly in a vi-
nyl bag, tie the end tightly and dispose of it in the
same way as other general parts disposal.
Brought to you by BirfMark
Version 1.00 - 12/21/2010
RS−29