Toyota 1996 LAND CRUISER User Manual page 1045

RS−22
SUPPLEMENTAL RESTRAINT SYSTEM
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
− FRONT PASSENGER AIRBAG ASSEMBLY
REMOVAL
NOTICE:
If the wiring connector of the SRS is disconnected with the
ignition switch at ON or ACC, DTCs will be recorded.
1. DISCONNECT AIRBAG CONNECTOR
(a) Remove the glove compartment door
(See page BO−76).
(b) Remove the airbag connector from the airbag bracket.
NOTICE:
When handling the airbag connector, take care not to dam-
age the airbag wire harness.
(c) Disconnect the airbag connector.
2. REMOVE INSTRUMENT PANEL
(See pages BO−76)
3. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY
(a) Remove the 4 bolts and 2 nuts, and remove front passen-
ger airbag assembly.
(b) Pry up the 6 clips shown in the illustration and remove the
airbag door.
CAUTION:
Do not store the front passenger airbag assembly with the
airbag deployment direction facing down.Never disas-
semble the front passenger airbag assembly.
Brought to you by BirfMark
Version 1.00 - 12/21/2010
RS0P8−01