Ricoh S-C4.5 Field Service Manual page 65

4. Controller box cover [A] (
5. Remove the screw [A] on the controller board.
6. Install the HDD unit [B] in the controller board (
• The screw [A] is used in this step.
7. Reinstall the controller box cover and rear cover in the machine.
After Installing the HDD
1. Do SP5832-001 to format the hard disk.
2. Do SP5853-001 to copy the preset stamp data from the firmware to the hard disk.
3. Do SP5846-040 to copy the address book to the hard disk from the controller board.
4. Do SP5846-041 to let the user get access to the address book.
5. Turn the main power switch off/on.
Installing the Security Card
1. Insert the Security Card in the SD slot.
• For D115, use slot 2 (lower) and merge the Security Card into the Printer/Scanner card with
SP5-873-001. Remove the Security Card from the SD slot 2 after moving the security
applications and keep the Security Card at a safe location.
• For D116, use slot 1 (upper).
2. Enter the SP mode.
x 13)
x 3).
Controller Options
2
63