I-Fax Switches - Ricoh S-C4.5 Field Service Manual

Action when a fax SC has occurred
7 0: Automatic reset
1: Fax unit stops

I-Fax Switches

I-fax Switch 00 - Not used (do not change the settings) [SP No. 1-102-001]
I-fax Switch 01 [SP No. 1-102-002]
FUNCTION
No
Original Line Resolution of TX
Attachment File
0 200x100 Standard
1 200x200 Detail
2 200x400 Fine
3 300 x 300 Reserve
4 400 x 400 Super Fine
5 600 x 600 Reserve
6 Reserve
0: When the fax unit detects a fax SC code other than
SC1201 and SC1207, the fax unit automatically resets
itself.
1: When the fax unit detects any fax SC code, the fax unit
stops.
Cross Reference
Fax SC codes - See "Troubleshooting"
COMMENTS
These settings set the maximum resolution of the original that
the destination can receive.
0: Not selected
1: Selected
If more than one of these three bits is set to "1", the higher
resolution has priority. For example, if both Bit 0 and Bit 2
are set to "1" then the resolution is set for "Bit 2 200 x 400.
Bit Switches
5
175