Ricoh S-C4.5 Field Service Manual page 272

3. Appendix: SP Mode Tables
Svr Port Num (Sec)
017
Specifies the port number of the secondary delivery server.
Srv URL Path (Sec)
018
Specifies the URL path of the secondary delivery server.
Instant Trans Off
022
3
Enables or disables the prevention function for the continuous data sending.
UCS Settings
5846
Provides items for delivery server settings.
Machine ID (DelSvy)
Displays the unique device ID in use by the delivery server directory. The value is only
001
displayed and cannot be changed. This ID is created from the NIC MAC or IEEE 1394 EUI.
The ID is displayed as either 6-byle or 8-byte binary.
MC ID Clr (DelSvy)
Clears the unique ID of the device used as the name in the file transfer directory. Execute
002
this SP if the connection of the device to the delivery server is unstable. After clearing the ID,
the ID will be established again automatically by cycling the machine off and on.
Maximum Entries
Changes the maximum number of entries that UCS can handle.
003
If a value smaller than the present value is set, the UCS managed data is cleared, and the
data (excluding user code information) is displayed.
Delsvr Rtry Tmer
006
Sets the interval for retry attempts when the delivery server fails to acquire the delivery server
address book.
Delsvr Rtry Tmes
007
Sets the number of retry attempts when the delivery server fails to acquire the delivery server
address book.
76
-
-
[ 0 or 1 / 1 / - ]
0: Disable, 1: Enable
CTL
Displays ID
Clears ID
[150 to 999 / 150 / 1 /step]
[0 to 255 / 0 / 1 /step]
[0 to 255 / 0 / 1 /step]