Ricoh S-C4.5 Field Service Manual page 143

If an error occurs, the error code is displayed. For a list of information on error codes, see the following
table.
Code Cause
Physical address mapping
E20
error
E22 Decompression error
E23 Update program error
E24 SD card access error
Download data
E31
inconsistency*
Download data
E32
inconsistency*
E33 Version data error
E34 Locale data error
E35 Machine model data error
E36 Module data error
E40 Engine program error**
Operation panel program
E42
error*
Necessary Action
• Insert the SD card correctly.
• Use another SD card
• Store correct data in the SD card.
• Update controller program.
• Replace the controller.
• Insert the SD card correctly.
• Use another SD card.
• Insert the SD card that was used when the previous update
procedure is interrupted.
• Insert the SD card that stores the correct data.
• Store the correct data in the SD card.
• Store the correct data in the SD card.
• Store the correct data in the SD card.
• Store the correct data in the SD card.
• Store the correct data in the SD card.
• Replace BICU.
• Store the correct data in the SD card.
• Replace the operation panel board.
Using SP Mode
5
141