Ricoh S-C4.5 Field Service Manual page 415

Address
Acceptable CED detection frequency
6805A3
lower limit (high byte)
Acceptable CED detection frequency
6805A4
lower limit (low byte)
6805A5 CED detection time
Acceptable CNG detection frequency
6805A6
upper limit (high byte)
Acceptable CNG detection frequency
6805A7
upper limit (low byte)
Acceptable CNG detection frequency
6805A8
lower limit (high byte)
Acceptable CNG detection frequency
6805A9
lower limit (low byte)
6805AA Not used
6805AB CNG on time
6805AC CNG off time
Number of CNG cycles required for
6805AD
detection
6805AE Not used
Acceptable AI short protocol tone
6805AF (800Hz) detection frequency upper limit
(high byte)
Acceptable AI short protocol tone
6805B0 (800Hz) detection frequency upper limit
(low byte)
Acceptable AI short protocol tone
6805B1 (800Hz) detection frequency lower limit
(high byte)
Acceptable AI short protocol tone
6805B2 (800Hz) detection frequency lower limit
(low byte)
Function Unit
If both addresses contain FF
BCD (Hz) (H), tone detection is
disabled.
20 ms ± 20 ms Factory setting: 200 ms
If both addresses contain FF
BCD (Hz) (H), tone detection is
disabled.
If both addresses contain FF
BCD (Hz) (H), tone detection is
disabled.
- Do not change the setting.
20 ms Factory setting: 500 ms
20 ms Factory setting: 3000 ms
The data is coded in the same
-
way as address 680533.
- Do not change the settings.
If both addresses contain FF
Hz (BCD) (H), tone detection is
disabled.
If both addresses contain FF
Hz(BCD) (H), tone detection is
disabled.
NCU Parameters
Remarks
219
5