Bicu And Controller Board; Bicu - Ricoh S-C4.5 Field Service Manual

BICU and Controller Board

• Turn off the main power switch and unplug the machine before starting replacement.
• Before turning off the main power switch, check that no mechanical component is operating.
Mechanical components may stop out of their home positions if you turn off the main power switch
while they are operating. The component may be damaged if you try to remove it when it is not in the
home position.

BICU

Preparation
• Before replacing the NVRAM, be sure to save the NVRAM data.
• Saving from the BICU NVRAM to an SD card (
"System Service Mode" of the appendices of the this manual.)
Procedure
1. Rear cover ( p.71)
2. Scanner upper left cover (
3. Controller box [A] (
p.72)
x 6, x 1)
p.136 "NVRAM Data Upload/Download" in the
BICU and Controller Board
101
4