Ricoh S-C4.5 Field Service Manual page 233

Contrast
007
Adjust the contrast level. This setting is only activated for the specified mode with
SP4-921-004.
4941* White Line Erase
Selects the white line erase level.
0: None, 1: Weak, 2: Strong
4941 1 • This setting is effective for all modes.
• 0: White line erase is not used, and white level correction is used instead.
• This setting is applied regardless of what mode has been selected in SP4-921.
4942* Black Line Erase
Selects the black line erase level. This setting is effective only when originals are scanned
by the DF.
4942 1
[0 = No / 1 = Very weak / 2 = Weak / 3 = Strong]
This setting is applied regardless of what mode has been selected in SP4-921.
4943* WhitePapDetect BiLv
4943 1 Gray Scale
4943 1 Color2
4943 1 Color3
SP5-XXX (Mode)
5001 All Indicators On
Turns on all LEDs. The LCDs turn on and off every 3 seconds. Press the reset key to end this
5001 1
program.
5024* mm/inch Selection
[0 to 255 / 128 / 1/step]
[0 to 2 / 1 / 1/step]
[0 to 3 / 2 / 1/step]
[0 to 255 / 64 / 1/step]
[0 to 255 / 128 / 1/step]
[0 to 255 / 128 / 1/step]
System Service Mode
3
37