Reflect In Total Judgement; Sensors With Monochrome Cameras Only - Omron FQ2-S Series User Manual

• Sensors with Color Cameras Only
Item Parameter
Judgement Color difference
Parameter
Color deviation
R average
G average
B average

• Sensors with Monochrome Cameras only

Item Parameter
Judgement Density average
Parameter
Density deviat.
(density deviation)

Reflect in Total Judgement

You can specify whether to reflect the judgement results of an inspection item in the overall judgement.
−
[Inspect] [Inspection]
194
Inspecting with Color Data Inspection Item
Setting Description
0 to 442 Sets the upper and lower limits of the difference between the average
color and reference color that is to be judged as OK.
0 to 221 Set the upper and lower limits of the range of the deviation in the region
that is to be judged as OK.
0.0000 to 255.0000 Set the difference in the average value of the R (red) component that is to
be judged as OK.
0.0000 to 255.0000 Set the difference in the average value of the G (green) component that is
to be judged as OK.
0.0000 to 255.0000 Set the difference in the average value of the B (blue) component that is
to be judged as OK.
Setting Description
0 to 255 Set the judgement upper and lower limits for the average density in the
measurement region.
0 to 127 Set the upper and lower limits for the deviation in the average density in
the measurement region.
− −
[Add item.] [Color Data]
− −
[Details] Tab Page [Output parameter]
FQ2-S/CH User's Manual