Setting The Startup Scene - Omron FQ2-S Series User Manual

• Changing scenes by PROFINET command
Vision Sensor FQ2-S/CH Series User's Manual for Communications Settings (Cat. No. Z338)
3-3 Outputting Data and Controlling Operation through PROFINET

Setting the Startup Scene

(Setup Mode) − [Sensor settings] − [Startup settings]
The following items can be set.
Item
Startup mode
Startup scene
252
Changing the Scene to Change the Line Process
Purpose
Select whether the startup scene number is set
manually.
Set the scene number to use at startup.
Setting range
ON
OFF (The scene number when the settings were
saved will be the startup scene number. The star-
tup mode is set to OFF in the default settings.)
Standard models: 0 to 31,
Single-function models: 0 to 8,
Default: 0
FQ2-S/CH User's Manual