4-2 Setup Procedure for Inspection Items
FQ2-S1
FQ2-S2
FQ2-S3
The basic steps for setting up inspection items are shown below.
Configuring Inspection Items
Step 1
Teaching
Step 2
Setting Judgement Parameters
Step 3
If measurements are unstable
Setting Detailed Items
Step 4
Re-teaching
Step 5
Note
Only one inspection item can be used on the FQ2-S1 Series.
A combination of up to 32 inspection items can be used on the FQ2-S2/S3/S4/CH Series.
FQ2-S/CH User's Manual
FQ2-S4
FQ2-CH
Setup Procedure for Inspection Items
105