Reflect In Total Judgement; Detail Settings - Omron FQ2-S Series User Manual

Note
ASCII code table
The following table shows the ASCII codes that can be used for manual registration of master data and also
for registering characters of Limits.
Upper 4 bits
Lower 4 bits

Reflect in Total Judgement

You can specify whether to reflect the verification result of a 2D code inspection item in the overall judgement.
(The default setting is [Yes].)
−
[Inspect] [Inspection]
[Reflect]

Detail Settings

With the default settings, all of the parameters are set automatically. If the automatic settings are incorrect for
any reason, e.g., the code was read incorrect, set the detailed parameters manually and then perform teaching.
−
[Inspect] [Inspection]
Press [Meas. Parameter]
Set the measurement parameters.
Be sure to always specify the code type. When you automatically register matrix data, the code type, code
color, data matrix shape, and reverse settings are set automatically.
FQ2-S/CH User's Manual
− −
[Add item.] [2D-code]
− −
[Add item.] [2D-code]
− −
[Details] Tab Page [Output parameter]
−
[Details] Tab Page
−
135
Reading 2D-codes