Inspecting With The Search Inspection Item; Search Inspection Item; Setup Procedure For The Search Inspection Item - Omron FQ2-S Series User Manual

4-8 Inspecting with the Search Inspection Item

FQ2-S1 FQ2-S2

Search Inspection Item

This inspection item is used to perform inspections for shapes or for presence. The image pattern that is to be
measured is registered in advance and measurements are performed to see if the pattern is present or if the
shape is different.
The image pattern that is registered in advance is called the model. The degree to which the image matches
the model is called the correlation.
Sample Settings
Search region (region to
search for the model)

Setup Procedure for the Search Inspection Item

Step 1 Selecting the Inspection Item
− [Inspection]
[Inspect]
1
Press an unused inspection item number and press
[Add item.].
2
Press [Search].
Registering inspection items: p. 106
Note
Drag the arrow
148

Inspecting with the Search Inspection Item

FQ2-S3 FQ2-S4
Model
(desired image pattern)
+
at the bottom of the menu upward to display all of the inspection items.
Sample Measurement
Search for sections that are similar to the model.
OK NG
FQ2-S/CH User's Manual