Displaying A Frozen Image; Displaying A Saved Image - Omron FQ2-S Series User Manual

Displaying a Frozen Image

You can display a frozen image to stop image refreshing and display the last image that was input.
(Setup Mode)
4
1
Press .
2
Press [Camera].
3
Press [Freeze].
4
Press the [Back] Button to return to the [Display] Dis-
play.
Note
This can also be set with the [Freeze] button (

Displaying a Saved Image

You can display an image that was saved in internal memory in the Sensor or in an SD card. This can be done
to configure inspection items or to check measurements using saved images.
(Setup Mode)
1
Press .
2
You can select one of the following types of images
to display.
• [Log]:
Images that are logged in the Sensor's internal memory
• [Logging image file]:
Images that are logged in the SD card
• [Camera image file]:
Images that were logged with
Saving the Currently Displayed Camera Image:
p. 284
3
Press the [Back] Button to return to the [Display] Dis-
play.
Note
Refer to the following information for the procedures to save images.
Logging Measurement Data: p. 269
FQ2-S/CH User's Manual
) in the display settings display.
(Logging Button)
261
Display Functions