Inspecting With Color Data Inspection Item; Color Data Inspection Item; Setup Procedure For Color Data Inspection Item - Omron FQ2-S Series User Manual

4-14 Inspecting with Color Data Inspection Item

FQ2-S1 FQ2-S2

Color Data Inspection Item

This inspection item is used to perform inspections for foreign matter with a different color or for presence. The
region is set for a portion of the image with the color that is to be measured. This region is called the
measurement region. The average color within the measurement region is measured.
If a Sensor with a Monochrome Camera is connected, the average density in the measurement region is found
and inspections are performed for the difference from the registered reference value (density average) and the
variation within the measurement region (density deviation).
If a Sensor with a Monochrome Camera is connected, the average density in the measurement region is
measured and the density deviation is used for judgements.

Setup Procedure for Color Data Inspection Item

Step 1 Selecting the Inspection Item
− [Inspection]
[Inspect]
1
Press an unused inspection item number and press
[Add item.].
2
Press [Color Data].
Registering inspection items: p. 106
Note
Drag the arrow
192

Inspecting with Color Data Inspection Item

FQ2-S3 FQ2-S4
Sample Settings
Measurement region
at the bottom of the menu upward to display all of the inspection items.
Sample Measurement
Judges using the average
color of the measurement
region.
OK NG
FQ2-S/CH User's Manual