Reflect In Total Judgement; Detail Settings - Omron FQ2-S Series User Manual

9
Press [Back].
Note
ASCII code table
The following table shows the ASCII codes that can be used for manual registration of master data and also
for registering characters of Limits.
Upper 4 bits
Lower 4 bits

Reflect in Total Judgement

You can specify whether to reflect the verification result of a barcode inspection item in the overall judgement.
(The default setting is [Yes].)
−
[Inspect] [Inspection]

Detail Settings

−
[Inspect] [Inspection]
Press [Meas. parameter].
Set the measurement parameters.
Be sure to always specify the code type. Specify other items as necessary. If master data is automatically
registered, the code type, the composite codes on/off setting, and the read direction are automatically set.
FQ2-S/CH User's Manual
− −
[Add item.] [Bar code]
− −
[Add item.] [Bar code]
− −
[Details] [Output parameter]
−
[Details] Tab Page
−
[Reflect]
127
Reading Bar Codes