Increasing The Processing Speed; Measurement Data That Can Be Used For External Outputs And Calculations - Omron FQ2-S Series User Manual

Increasing the Processing Speed

Make the measurement region smaller to reduce the processing time.
Changing the Measurement Region p. 155

Measurement Data That Can Be Used for External Outputs and Calculations

The following values can be used as measurement data and output to external devices via the Ethernet or used
in calculations.
Expression text Data name
string
JG Judgement
L Number of labels
TAR Total label area
AR[0] to AR[99] Area
X[0] to X[99] Gravity X
Y[0] to Y[99] Gravity Y
ATH[0] to ATH[99] Master angle
SA Reference area
SX Ref. position X (refer-
ence position X)
SY Ref. position Y (refer-
ence position Y)
4-17 Calculations and Judgements Using Inspection Item Data p. 213
FQ2-S/CH User's Manual
Description
This is the Labeling judgement results.
This is the number of labels found.
This is the total area of all labels found.
These are the areas of each individual label.
These are the X coordinates of the center of
each label.
These are the Y coordinates of the center of
each label.
These are the master angle of the center of each
label.
This is the reference area.
This is the X coordinate of the reference posi-
tion.
This is the Y coordinate of the reference posi-
tion.
Inspecting with the Labeling Inspection Item
Data range
−2: No judgement (not measured),
0: Judgement is OK,
−1: Judgement is NG,
−13: Teaching not performed error,
−14: Figure not registered error,
−15: Out of range error
0 to 100
0 to 999,999,999.9999
0 to 999,999,999.9999
−99,999.9999 to 99,999.9999
−99,999.9999 to 99,999.9999
−180 to 180
0 to 999,999,999.9999
−99,999.9999 to 99,999.9999
−99,999.9999 to 99,999.9999
211