Sensor Data Units - Omron FQ2-S Series User Manual

Sensor Data Units

Specifications
Item
I/O Parallel I/O SDU1@
specifi-
cations
SDU2@
RS-232C
Sensor interface
Input specifications
Output specifications
Rat- Power supply voltage
ings
Insulation resistance
Current consumption
Envi- Ambient temperature
ron- range
mental
Ambient humidity
immu-
range
nity
Ambient atmosphere
Vibration resistance
(destruction)
Shock resistance
(destruction)
Degree of protection
Materials
Size
Weight
Accessories
Table 1
Item NPN
Input specifi- ON: Shorted to 0 V, or 1.5 V max.
cations OFF: Open (leakage current: 0.1 mA max.)
Output speci- NPN open collector
*1
fications 30 VDC, 50 mA max., residual voltage: 1.2 V max.
*1: Do not allow the load current to exceed 50 mA. The output circuit may be damaged if the load current exceeds 50 mA.
410
Specifications and Dimensions
Sensor Data Units
FQ-SDU1@ Parallel Interface Sensor Data Unit (SDU10: NPN, SDU15: PNP)
FQ-SDU2@ RS-232C Interface Sensor Data Unit (SDU20: NPN, SDU25: PNP)
11 inputs (TRIG, RESET, IN0 to IN7, and DSA)
24 outputs (GATE, D0 to D15, ACK, RUN, BUSY, OR, ERROR, STGOUT, and SHTOUT)
8 inputs (IN0 to IN5, TRIG, and RESET)
7 outputs (ACK, RUN, BUSY, OR, ERROR, STGOUT, SHTOUT)
1 channel, 115,200 bps max.
*FQ-SDU2@ only.
FQ2-S3, FQ2-S4, FQ2-CH connected with FQ-WU@@@): OMRON interface
*Number of connected Sensors: 1
Refer to Table 2.
21.6 to 26.4 VDC (including ripple)
Between all DC external terminals and case: 0.5 MΩ min. (at 250 VDC)
2.5 A max. (FQ2-CH, FQ2-S@@@@@@-@@@ + FQ-SDU@@)
0.4 A max. (FQ2-S3@-@@@ + FQ-SDU@@, FQ2-S4@-@@@ + FQ-SDU@@)
0.1 A max. (for FQ-SDU@@)
Operating: 0 to 50°C, Storage: −20 to 65°C (with no icing or condensation)
Operating and storage: 35% to 85% (with no condensation)
No corrosive gas
10 to 150 Hz, single amplitude: 0.35 mm, X/Y/Z directions, 8 min each, 10 times
2
150 m/s 3 times each in 6 directions (up, down, right, left, forward, and backward)
IEC 60529 IP20
Case: PC + ABS, PC
62 × 90 × 65 (W×H×D) (Excluding connectors, DIN Track, and protrusions.)
Approx. 150 g
Instruction Manual
PNP
ON: Shorted to power supply voltage, or power supply volt-
age −1.5 V max.
OFF: Open (leakage current: 0.1 mA max.)
PNP open collector
30 VDC, 50 mA max., residual voltage: 1.2 V max.
FQ2-S/CH User's Manual