Aaa Configuration Example - HP 1920 Gigabit Ethernet Switch Series User Manual
Hp 1920 gigabit ethernet switch series
Hide thumbs
Also See for 1920 Gigabit Ethernet Switch Series:
- User manual (547 pages) ,
- Getting started manual (33 pages) ,
- Supplementary manual (63 pages)
Table of Contents
Advertisement
Item
Login Accounting
Name
Secondary Method
AAA configuration example
Network requirements
As shown in
accounting for Telnet users.
Figure 339 Network diagram
Configuration procedure
1.
Enable the Telnet server function, and configure the switch to use AAA for Telnet users. (Details not
shown.)
2.
Configure IP addresses for the interfaces. (Details not shown)
3.
Configure a local user:
a.
Select Device > Users from the navigation tree.
b.
Click the Create tab.
c.
Enter the username telnet.
d.
Select the access level Management.
e.
Enter the password abcd and confirm the password.
f.
Select the password encryption method Irreversible.
g.
Select the service type Telnet Service.
h.
Click Apply.
Description
Configure the accounting method and secondary accounting method for login users.
Options include:
•
HWTACACS—HWTACACS accounting. You must specify the HWTACACS
scheme to be used.
•
Local—Local accounting.
•
None—No accounting.
•
RADIUS—RADIUS accounting. You must specify the RADIUS scheme to be used.
•
Not Set—The device uses the settings in the Default Accounting area for login
users.
Figure
339, configure the switch to perform local authentication, authorization, and
359
Hide quick links:
Advertisement
Table of Contents
