Configuring An Snmp Group - HP V1910 User Manual

Configuration items for configuring an SNMP community
2.
Item
Community Name
Access Right
View
ACL
Return to SNMPv1 or SNMPv2c configuration task

Configuring an SNMP group

Table 32 Select Device  SNMP from the navigation tree.
Table 33 Click the Group tab to enter the page as shown in b.
Table 34 Click Add to enter the Add SNMP Group page as shown in c.
SNMP group
b.
Description
Set the SNMP community name.
Configure SNMP NMS access right

Read only—The NMS can perform read-only operations to the MIB objects when
it uses this community name to access the agent,

Read and write—The NMS can perform both read and write operations to the MIB
objects when it uses this community name to access the agent.
Specify the view associated with the community to limit the MIB objects that can be
accessed by the NMS.
Associate the community with a basic ACL to allow or prohibit the access to the agent
from the NMS with the specified source IP address.
122
list.